Skip to content
Generator & Backup

Transfer Switches & Connection

Compact Interlock Kits for Small Panels

Interlocks are not rated in amps, because they carry no current. A compact kit is compact because your PANEL is 100 or 125 amps — never because your generator is small.

Written byMike M.

Published

Disclosure: we earn a commission on purchases made through links on this page, at no cost to you. It does not affect what we recommend or what we say about it — how we are funded.

The short answer

A compact interlock kit is one cut for a 100 amp or 125 amp load center, and the amperage in its name is the PANEL's rating, never the generator's. There is no such thing as a 10 amp or 20 amp interlock switch: an interlock is a slide of steel over two breaker handles and carries no current at all, so no current rating applies to it. For a small panel the kits are the XMK Square D QO/Homeline 100-125 A, the SPZOCE Eaton BR 100/125 A, the XMK Siemens/Murray 100 A, and Eaton's own factory BRMIKBR, which is the one that publishes compliance with NEC Article 702.

People search for a small, compact or low-amp interlock for a sensible reason: they have a modest panel, or a 2,000 watt inverter rather than a 13,000 watt tri-fuel machine, and they assume the hardware scales with one of those. Only one of those two assumptions is right, and getting the wrong one is how people buy a kit that does not fit.

Why there is no amp rating on an interlock

A transfer switch is wired into the circuit: current flows through it, so it carries a rating and you match that rating to the generator. An interlock kit is not wired into anything. It is a bracket that slides over the main breaker handle and the generator breaker handle, and makes it mechanically impossible for both to be on at the same time. No current passes through it, so there is no current for it to be rated at.

What is sized to what

The interlock kit
Sized to the PANEL - brand, series, amperage band
The generator breaker
Sized to the generator - usually 30 A or 50 A
The inlet box and cord
Sized to the generator's outlet
The transfer switch, if you use one instead
Sized to the generator

Only the first row is decided by your panel, and it is the row the interlock belongs to. A 2,000 watt inverter and a 13,000 watt tri-fuel machine use the identical kit on the identical panel.

That is the whole reason a compact kit is compact: a 100 amp load center is a physically smaller box with its breakers closer together, so the bracket is shorter and the throw is narrower. The 200 amp interlock guide is the same page for the larger panels, and the difference between them is measured in inches of breaker spacing.

The compact kits, ranked

The short answer

Compact interlock kits for 100-125 A panels

#ProductBest forScorePrice
1
Eaton BRMIKBR Factory Interlock Kit 100-125A
Eaton BRMIKBR Factory Interlock Kit 100-125A

Pay the premium for this one: a factory interlock with a stated NEC Article 702 basis removes both the fit risk and the inspection risk.

Factory kit that satisfies inspectors9.4/10$98.21
2
XMK Interlock Kit — Square D QO/Homeline 100/125A
XMK Interlock Kit — Square D QO/Homeline 100/125A

The correct kit for an older, smaller Square D panel — and the published spacing range means you can confirm fit before ordering.

Smaller Square D panels9.0/10$19.99
3
SPZOCE Interlock Kit — Eaton BR 100/125A
SPZOCE Interlock Kit — Eaton BR 100/125A

A complete, cheap kit for a smaller Eaton BR panel, as long as your main and generator breaker positions can be adjacent.

Smaller Eaton BR panels8.9/10$26.99
4
XMK Interlock Kit — Siemens/Murray 100A
XMK Interlock Kit — Siemens/Murray 100A

The best-documented interlock kit here on the question that actually matters — it tells you the spacing for both Siemens neutral variants.

100A Siemens, both neutral types9.1/10$19.99

#ad Amazon prices as of November 19, 2026; they may have changed since. Scores are our editorial judgment from published specifications, not test results — how we pick. How we are funded.

PanelKitPublished fit
Eaton BR, 100-125 A, factory partEaton BRMIKBRManufacturer states it meets NEC Article 702 and lets the load center function as a generator panel
Square D QO / Homeline, 100-125 AXMKSingle-handle horizontal throw, left to right, 3/4 to 7/8 in spacing between main and branch breakers
Eaton / Cutler-Hammer BR, 100-125 ASPZOCEAdjacent main and generator breakers
Siemens / Murray, 100 AXMK7/8 in spacing for plug-on-neutral panels, 1 1/4 in for non-plug-on-neutral
Each manufacturer's published compatibility statement for that kit. The Siemens row is the one that catches people out — same brand, same amperage, two different parts depending on the neutral type.

Measure before you order

  1. 1Open the panel door and photograph the label. Brand, series and amperage are printed on it. Do not remove the dead front cover to do this.
  2. 2Measure the gap between the main breaker handle and the handle of the breaker next to it, in inches. This is the figure the kits publish and it is what decides fit.
  3. 3Check the neutral type if yours is a Siemens or Murray panel. Plug-on-neutral takes 7/8 inch; non-plug-on-neutral takes 1 1/4 inch.
  4. 4Then choose the kit, and have your electrician install it. The panel compatibility guide walks the same ground brand by brand.

The factory Eaton kit leads this list for a reason that is not about the hardware. Third-party brackets are mechanically fine and much cheaper, but some inspectors will only pass the panel manufacturer's own part, and the BRMIKBR is the one here that publishes compliance with NEC Article 702. If your jurisdiction is strict, that published statement is what you are buying.

Eaton BRMIKBR Factory Interlock Kit 100-125A
Panel
Eaton Type BR
Panel size
100-125 A
Code
NEC Article 702

#1 · Factory kit that satisfies inspectors

Eaton BRMIKBR Factory Interlock Kit 100-125A

9.4/10

Pay the premium for this one: a factory interlock with a stated NEC Article 702 basis removes both the fit risk and the inspection risk.

$98.21See the BRMIKBR Factory Interlock Kit 100-125A on Amazon

#ad Price as of November 19, 2026; it may have changed since. How we are funded.

Why we picked it

  • The manufacturer's own kit, listed for the panel, citing the NEC article it satisfies — this is the version no inspector argues with
  • Fit is certain: Eaton made both the panel and the plate
  • Removes the measure-and-hope step entirely

Good to know

  • Roughly four times the price of a third-party plate
Published specification & our scoring
  • Eaton BRMIKBR Type BR mechanical interlock kit (manufacturer)
  • Allows the load center to function as a generator panel (manufacturer)
  • Prevents utility and generator supplies being energized simultaneously (manufacturer)
  • Manufacturer states it meets National Electrical Code Article 702 requirements
Panel fit certainty
10
Code basis
10
Circuit flexibility
9
Completeness
8
Value
6

Specification figures are the manufacturer’s published values. Scores are our editorial judgment from those figures and are never published as structured review data — how we pick.

XMK Interlock Kit — Square D QO/Homeline 100/125A
Panel
Square D QO / Homeline
Panel size
100 or 125 A
Spacing
3/4 - 7/8 in (mfr)

#2 · Smaller Square D panels

XMK Interlock Kit — Square D QO/Homeline 100/125A

9.0/10

The correct kit for an older, smaller Square D panel — and the published spacing range means you can confirm fit before ordering.

Why we picked it

  • The manufacturer publishes the exact spacing range, which is the only figure that determines fit
  • Older 100 A and 125 A panels are exactly the homes where a transfer switch install is most awkward
  • Very inexpensive

Good to know

  • Measure the spacing: 3/4 to 7/8 inch is a narrow window and panels vary by production year
Published specification & our scoring
  • Compatible with Square D QO or Homeline 100 A and 125 A panels (manufacturer)
  • Single-handle horizontal throw, left to right, with 3/4 to 7/8 inch spacing between main and branch breakers (manufacturer)
  • Prevents the main breaker being on while the generator breaker is on (manufacturer)
Panel fit certainty
8
Circuit flexibility
9
Completeness
7
Code basis
8
Value
10

Specification figures are the manufacturer’s published values. Scores are our editorial judgment from those figures and are never published as structured review data — how we pick.

SPZOCE Interlock Kit — Eaton BR 100/125A
Panel
Eaton / Cutler-Hammer BR
Panel size
100 or 125 A
Layout
Adjacent main + gen breaker

#3 · Smaller Eaton BR panels

SPZOCE Interlock Kit — Eaton BR 100/125A

8.9/10

A complete, cheap kit for a smaller Eaton BR panel, as long as your main and generator breaker positions can be adjacent.

$26.99See the Interlock Kit — Eaton BR 100/125A on Amazon

#ad Price as of November 19, 2026; it may have changed since. How we are funded.

Why we picked it

  • States the layout requirement — adjacent main and generator breaker — which is as important as the spacing
  • Complete with drill bit and labels
  • Inexpensive

Good to know

  • The adjacent-breaker requirement may mean rearranging breakers, which adds to the install
Published specification & our scoring
  • Compatible with Eaton Cutler Hammer BR Series 100 A and 125 A panels with adjacent main and generator breakers (manufacturer)
  • Includes a 3/16-inch steel drill bit
  • Includes the interlock plate, three screws and nuts, a start-up procedure label and reusable labels
Panel fit certainty
7
Circuit flexibility
9
Completeness
9
Code basis
7
Value
10

Specification figures are the manufacturer’s published values. Scores are our editorial judgment from those figures and are never published as structured review data — how we pick.

XMK Interlock Kit — Siemens/Murray 100A
Panel
Siemens / Murray
Panel size
100 A
Spacing
7/8 in PoN, 1 1/4 in non-PoN

#4 · 100A Siemens, both neutral types

XMK Interlock Kit — Siemens/Murray 100A

9.1/10

The best-documented interlock kit here on the question that actually matters — it tells you the spacing for both Siemens neutral variants.

$19.99See the Interlock Kit — Siemens/Murray 100A on Amazon20% off

#ad Price as of November 19, 2026; it may have changed since. How we are funded.

Why we picked it

  • This is the only listing here that publishes BOTH neutral variants' spacing — exactly the information you need to identify your panel
  • Covers the older 100 A Siemens and Murray panels that most kits skip
  • Very cheap

Good to know

  • You still have to open the panel and identify which variant you have
Published specification & our scoring
  • Compatible with Siemens / Murray 100 A panels (manufacturer)
  • 7/8 inch spacing for plug-on-neutral panels, 1 1/4 inch for non-plug-on-neutral (manufacturer)
  • Prevents mains and generator supply being live simultaneously (manufacturer)
Panel fit certainty
9
Circuit flexibility
9
Code basis
7
Completeness
7
Value
10

Specification figures are the manufacturer’s published values. Scores are our editorial judgment from those figures and are never published as structured review data — how we pick.

An interlock is one of three parts, and the other two are sized to the generator rather than the panel. You also need a power inlet box in an exterior wall and a cord long enough to reach the machine at the CPSC's published 20-foot distance. The best inlet boxes and the cord gauge guide cover both.

The rest of the chain

SURAIELEC PIB30B 30A Power Inlet Box

Easiest 30A inlet to wire

SURAIELEC PIB30B 30A Power Inlet Box

PlugSaf 25 ft 30A L14-30 Cord, 10 AWG

The default generator cord

PlugSaf 25 ft 30A L14-30 Cord, 10 AWG

Reliance Controls PB30 30A Power Inlet Box

The standard 30A inlet

Reliance Controls PB30 30A Power Inlet Box

A 30 A inlet box rated 7,500 W suits most machines a small panel will be backing up, and a 25-foot cord is the realistic minimum for the published placement distance.

One honest alternative worth naming: if your panel is small and your generator is small, a transfer switch may suit you better than an interlock. A switch has a fixed list of circuits chosen at installation, which does the load management for you — an interlock gives you every circuit in the house and leaves the managing to you at the panel door. Interlock kit versus transfer switch is that decision in full, and the cheapest complete switch kits are ranked separately.

In short

Our recommendation

Best Compact Interlock

9.4/10

Eaton BRMIKBR Factory Interlock Kit 100-125A

Pay the premium for this one: a factory interlock with a stated NEC Article 702 basis removes both the fit risk and the inspection risk.

Runner-up

9.0/10

XMK Interlock Kit — Square D QO/Homeline 100/125A

The correct kit for an older, smaller Square D panel — and the published spacing range means you can confirm fit before ordering.

#ad Price as of November 19, 2026; it may have changed since. How we are funded.

Brands: want your product tested? For Brands.

Questions people actually ask

Is there a 10 amp interlock switch?

No, and no interlock carries an amp rating at all. An interlock kit is a steel bracket that slides over two breaker handles to stop both being on at once — no current passes through it, so there is nothing to rate. The amperage in a kit's name is the rating of the PANEL it fits, which is why the small kits say 100 A or 125 A.

What is a compact interlock kit?

One cut for a small load center, typically 100 A or 125 A. Those panels are physically smaller with their breakers closer together, so the bracket is shorter and the throw narrower — the XMK Square D kit publishes 3/4 to 7/8 inch spacing against 1 1/4 to 1 7/16 inch for the equivalent Eaton 150/200 A part.

Does a small generator need a smaller interlock kit?

No. The generator never changes which interlock you need, because the interlock is sized to the panel. A 2,000 watt inverter and a 13,000 watt tri-fuel machine take the identical kit on the identical panel. What the generator does decide is the breaker it back-feeds through, the inlet box and the cord.

Which interlock kit fits a 100 amp panel?

It depends on the brand and, on Siemens and Murray panels, the neutral type. The XMK Square D QO/Homeline kit covers 100-125 A, the SPZOCE Eaton BR kit covers 100/125 A with adjacent main and generator breakers, and the XMK Siemens/Murray 100 A kit publishes 7/8 inch spacing for plug-on-neutral panels and 1 1/4 inch for non-plug-on-neutral ones.

Can I install a compact interlock kit myself?

In most US jurisdictions, no. It is permanent work on the supply side of your panel, requiring a permit and an inspection, and some inspectors accept only the panel manufacturer's own part — which on Eaton BR panels is the factory BRMIKBR. Settle that question with your inspector before you order anything.

Is an interlock kit cheaper than a transfer switch?

Substantially, on the hardware — the kits on this page are a fraction of what a complete switch kit costs. The installation is still licensed work either way, and the switch does your load management for you where an interlock hands you every circuit and leaves the managing to you.

Sources

  1. US Consumer Product Safety Commission — Portable Generator Information CenterThe 20-foot placement guidance that sets the minimum practical cord length referenced on this page.
Eaton BRMIKBR Factory Interlock Kit 100-125A

Reference

Interlock Kit Panel Compatibility

A reference table of published interlock breaker-spacing figures by panel brand and amperage, plus how to identify your panel.

SPZOCE Interlock Kit — Square D QO/Homeline 150/200A

Connection Comparison

Interlock Kit vs Transfer Switch

Interlock kit against transfer switch on cost, circuit access, load management, panel fit and inspection risk.